Mitchell Larsen Studio

Customer Success Stories

Customer Success Stories

Customer Success: Manufacturing

Mitchell Larsen Studio: Glass Art, a Hurricane and a Waterjet

Michell Larsen Glass

On the beautiful island of St Croix in the U.S. Virgin Islands, the Mitchell Larsen Studio employs the new OMAX ProtoMAX abrasive waterjet in the process of their glass art creations.

For over fifteen years, Jan Mitchell and Steffen Larsen have maintained their studio storefront out of a pink Danish colonial. As Larsen said, “we bought and renovated a historic building in downtown Christiansted and we employ two people to help both upstairs where the kilns are and downstairs in the gallery.” Jan and Steffen produced Jan’s painted art pieces consisting of island keepsakes, painted plates, and Christmas decorations. “We were honored to supply Christmas glass ornaments for the White House and the Park Service in DC,” adds Larsen.

To help create the colorful works, Mitchell Larsen Studios had been using a waterjet for some time. The primary benefits of an abrasive waterjet for glass cutting is that the waterjet cuts accurately and quickly without exposing the glass to heat transfer that would distort the end product.  However, as Larsen states, “every time we had a big storm hitting the Island and devastating the local grid our machinery sat idle – sometime for months – until power was restored, and last year’s two Cat 5 hurricanes finally damaged our good old waterjet beyond repair.”

With their old waterjet out of action, Mitchell Larsen Studio had to make a choice. “The fact that our business depends on water jetting we had a hard choice to make,” says Larsen. “We needed a new waterjet and we needed a setup that eliminated the dependence on the local grid. So we went looking for a waterjet that would work with 240V single phase and not break the bank.”

the protomax at the michelle larsen shop

With 240V single phase as a priority, the ProtoMAX was the obvious solution. In addition to its domestic power requirements, the ProtoMAX delivers 30,000 psi cutting power with a 5 hp pump. In addition, the pump and cutting table are on casters for easy relocation. With the clamshell cover and submerged cutting, the ProtoMAX is safe and quiet (approx. 76 db).

After the last hurricane, Larsen explains, “it took us nine months to reestablish our new workshop, and it is only a couple of weeks ago we started up our ProtoMAX and it has been running flawlessly several hours every day since then.”

“We like the fact that the ProtoMAX is not a startup but part of OMAX Corp. and can draw from the company’s vast experience with big waterjets,” Larsen states. With 25 years of abrasive waterjet innovation under their belt, OMAX Corp. has developed machine tools for every type of user. The ProtoMAX is the latest in a vast array of waterjet types and styles. Bringing all the versatility benefits of large abrasive waterjets together in a sleek and economic package.

“Our new hurricane-proof workshop is build next to our house, and since we are producing plenty of power from solar and wind we’ll never again experience the long power outages of the past,” says Larsen. “To play it safe we installed a second backup diesel generator. Sooner or later we’ll have another Cat 5 and this time we’ll be ready for it.”

After the hurricane, not having a workshop with functioning equipment put a delay in Jan and Steffen’s production. “Nine months without a waterjet has generated a huge backlog of work and the next couple of months will put our ProtoMAX to the test,” says Larsen. Together, the Mitchell Larsen Studio and the ProtoMAX are ready for whatever Caribbean weather may come.

To find out more about ProtoMAX, click here.

Want to know more about how OMAX can help you build your business? Contact Sales