• EnduroMAX Pump Right

All products meet rigorous international standards and requirements. Learn more »

See EnduroMax Pump

METAVAK SHOW

Oct 8 - Oct 10

The 4th Generation OMAX EnduroMAX Pump is the industry leader in high efficiency reliable direct drive pump technology. Designed for long life, the EnduroMAX Pump is capable of up to 1,000 hours between pump rebuilds, maximizing machine uptime. The simple yet robust design is specifically engineered to simplify maintenance through innovative features such as independent cylinders. The operator can rebuild each cylinder as needed, further shortening the maintenance cycle. The EnduroMAX Pump is standard on all new OMAX JetMachining Centers and is retrofittable to earlier OMAX abrasive waterjet machines.

Units:
  • EnduroMAX Pump Front View

    38.5 " Height 978 mm Height
    EnduroMAX Pump Front
    66.0 " Length 1,676 mm Length
  • EnduroMAX Pump Side View

    38.5 " Height 978 mm Height
    EnduroMAX Pump Side
    36.0 Width 914 mm Width

MODEL 3060V

Power

Motor Power 30 hp 22 kW
Maximum JetPower* 25.5 hp 19.0 kW

Pressure Specifications

Output Pressure 60,000 psi 4,100 bar
Orifice & Flow Rate ** 0.012" / 0.67 gpm 0.30 mm / 2.54 lpm

Pump Dimensions

Footprint – (L x W) 66.0" x 36.0" 1,676 mm x 914 mm
Height 38.5" 978 mm

MODEL 4060V

Power

Motor Power 40 hp 30 kW
Maximum JetPower* 34.0 hp 25.4 kW

Pressure Specifications

Output Pressure 60,000 psi 4,100 bar
Orifice & Flow Rate ** 0.014" / 0.92 gpm 0.36 mm / 3.48 lpm

Pump Dimensions

Footprint – (L x W) 66.0" x 36.0" 1,676 mm x 914 mm
Height 38.5" 978 mm

MODEL 5060V

Power

Motor Power 50 hp 37 kW
Maximum JetPower* 42.5 hp 31.7 kW

Pressure Specifications

Output Pressure 60,000 psi 4,100 bar
Orifice & Flow Rate ** 0.016" / 1.20 gpm 0.41 mm / 4.54 lpm

Pump Dimensions

Footprint – (L x W) 66.0" x 36.0" 1,676 mm x 914 mm
Height 38.5" 978 mm

* JetPower is directly proportional to the water pressure at the nozzle times the volume flow rate of the waterjet stream.

** Recommended maximum orifice size. Smaller orifice sizes have a corresponding lower flow rate.

  • EnduroMAX pump technology delivers the highest JetPower in the industry for faster and more efficient cutting
  • Simple industry-proven and robust pump design
  • Independent cylinders for ease of maintenance
  • Solid wood lid provides access to the pump and doubles as a workbench
  • Highly reliable design capable of up to 1000 cutting hours between maintenance cycles
  • Variable Frequency Drive reduces startup power consumption and maximizes operating flexibility
  • Continuous 60,000 psi operation for faster part processing
  • Available in 30 hp, 40 hp, and 50 hp models
  • Increased productivity with operating efficiencies up to 85%
  • 4th Generation direct drive pump technology lowers operating costs and increases pump operating life
  • Continuously adjustable VFD technology significantly expands pump capabilities by controlling output flow rate and pressure
  • Lower overall energy costs compared to inefficient intensifier pump designs
  • Environmentally “green” system with quiet and clean operation and low electrical consumption
  • Maximizes production with maintenance intervals more than double the industry standard
  • Made in the USA alongside the OMAX JetMachining Center for maximum compatibility
 

Related Articles

View All Articles
Save Money with OMAX Direct-Drive Pumps

As far as machine tools go, OMAX abrasive waterjets are environmentally responsible. But not only that, by being environmentally responsible they can save you money. One aspect that makes OMAX waterjets so “green” is the OMAX lines of direct-drive pumps. These pumps don’t use hyrdaulic oil, so there is no need for costly chemical disposal when conducting maintenance. Also, the water and power...Read More »

Engineering Custom Safety Solutions with Ash Safety

“Our OMAX waterjet allows us to produce ratchet rings from brass bronze for our load arrestor blocks, high performance rockers for vintage motorcycle championships, as well as custom marine engine transom plates and other various bespoke fittings,” said Andre Beard owner of Ash Safety. “Our APL Load Arrestors could hold rivet guns and tools with weights up to...Read More »

Venables Machine Works Trusts Their OMAX 55100 for Quick Turnarounds

Off the Trans-Canada Yellowhead Highway in Saskatoon, Saskatchewan, Venables Machine Works Limited takes advantage of abrasive waterjet technology to beat tight turnaround times. “Meeting tight delivery deadlines helps promote Venables as a shop that will manufacture on time and on budget,” states Dan Wingerak, Venables’ Shop Manager and Vice President of Operations.

...Read More »
Composites Leader Streamlines Testing With OMAX Waterjet Technology

Continental Structural Plastics (CSP) is a world leader in the creation of lightweight composite materials. CSP shapes these custom composites into components for vehicles, HVAC, and construction markets. The company develops proprietary composite formulations and manufacturing processes to meet the design and regulatory needs of customers around the globe.

To demonstrate material and...Read More »

See It In Action

View All Tradeshows
  • METAVAK

    South Holland , Netherlands

    October 8 - October 10, 2019
  • BlechExpo

    Stuttgart , Germany

    November 5 - November 8, 2019
What can we help you with?