OptiMAX 60X Abrasive Waterjet

OptiMAX 60X
PRECISION JETMACHINING CENTER

The OMAX OptiMAX 60X is the culmination of three decades of engineering expertise and experience, resulting in the world’s most accurate waterjet.

  • Cutting envelope of 10' 10" x 5’ 2” (3,302 mm x 1,575 mm)
  • ±0.001" (±0.025 mm) linear position accuracy

Waterjet system includes pump and software.
Contact OMAX about optional accessories for your OptiMAX

OptiMAX 60X
Expand all

  • Backed by our exclusive IntelliMAX Premium Software
  • Exclusive IntelliTRAX abrasive jet linear drive system provides 350 in/min (8.9 m/min) traverse with real-time closed-loop positioning feedback
  • 12-inch (305 mm) programmable Z axis travel with lowest ceiling height requirement design in the industry.
  • Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
  • Standard scissor-style hard plumbing

  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
  • Does not create heat-affected zones or mechanical stresses
  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • No tool changes & minimal fixturing dramatically reduce setup

  • Unlimited free training for the life of your machine
  • Unlimited software upgrades for the life of the machine
  • 2-year / 4000-hour limited warranty
  • 3 days of onsite training upon installation

DIMENSIONS & SPECS

Footprint (with pump & controller) 22' 10" x 11' 11" (6,960 mm x 3,633 mm)
Height (with Scissor plumbing) 9' 9" (2,972 mm)
Operating Weight 36,118 lb (16,383 kg)
Weight (tank empty) 8,500 lb (3,856 kg)
X-Y Cutting Travel* 10' 10 x 5' 2" (3,302 mm x 1,575 mm)
Z-Axis Travel (with Motorized Z Axis)* 12" (305" mm)
Table Size 18' 4" x 11' 6" (5,588 mm x 3,506 mm)
Material Supports Slats 4" x 1/8" Galvanized Steel
Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements 3-Phase, 380-480 VAC ±10%, 50-60 Hz
Noise Level Below 80 dBA at one meter for submerged cutting
Speed 350 in/min (8,890 mm/min)
Linear Positional Accuracy* ±0.001" (±0.025 mm)
Repeatability* ±0.001" (±0.025 mm)
Ballbar Circularity* ±0.0025" (±0.0635 mm)

* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).

PUMP INFO

Maximized uptime with 1,000 hours between maintenance cycles
Increased production by delivering 30% more cutting power
Variable Frequency Drive reduces startup power consumption and maximizes operating flexibility

Learn more about OMAX pumps

  EnduroMAX 50 HP EnduroMAX 40 HP EnduroMAX 30 HP
Motor Power 50 HP (37kW) 40 HP (30kW) 30 HP (22 kW)
MAX Jet Power 42.5 HP (31.5 kW) 34.0 HP (34 kW) 25.5 HP (18.7 kW)
Output Pressure 60,000 psi 60,000 psi 60,000 psi
OrifIce & Flow Rate 0.016" / 1.20gpm
(0.41 mm / 4.54 lpm)
0.014" / 0.92gpm
(0.36 mm / 3.48 lpm)
0.012" / 0.67 gpm
(0.30 mm / 2.54 lpm)
Footprint LxWxH 66" x 36" x 38.5"
(1,676mm x 914mm x 978mm)
66" x 36" x 38.5"
(1,676mm x 914mm x 978mm)
66" x 36" x 38.5"
(1,676mm x 914mm x 978mm

Want to know more about the OptiMAX 60X Precision Jetmachining Center? Contact Sales