OMAX 120X Abrasive Waterjet

OMAX 120X OMAX 120X

OMAX 120X
PRECISION JETMACHINING CENTER

The OMAX 120X is ideal for multiple-part projects or large-scale part production.

  • Available in a range of lengths from 33' 3" to 51' 6" feet (10.13 m to 15.70 m)
  • ±0.001" (±0.025 mm) linear position accuracy

Waterjet system includes pump and software.

Expand all

  • Backed by our exclusive IntelliMAX Premium Software
  • Advanced high-precision IntelliTRAX linear drive technology designed exclusively for the abrasive waterjet environment
  • Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
  • Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
  • Standard 600 lb Bulk Abrasive Delivery System transports garnet from the assembly's large hopper into the Zero Downtime Hopper located on the Z-Axis
  • Standard scissor-style hard plumbing

  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
  • Does not create heat-affected zones or mechanical stresses
  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • No tool changes & minimal fixturing dramatically reduce setup

DIMENSIONS & SPECS

Footprint (with pump)33' 3" x 19' 5" to 51' 6" x 22' 5" (10.13 m x 5.92 m to 15.70 m x 6.81 m)
Height (with scissor plumbing)14'0" (4.27 m)
Operating Weight71,679 lbs to 123,453 lbs (32,513 kg to 55,997 kg)
Weight (tank empty)22,000 lbs to 34,000 lbs (9,979 kg to 15,422 kg)
X-Y Cutting Travel*20' x 10' to 40' x 10' (6.09 m x 3.04 m to 12.19 m x 3.04 m)
Z-Axis Travel (with Motorized Z Axis)*8" (203 mm)
Table Size21' x 11'5" to 41' x 11'5" (6.40 m x 3.48 m to 12.50 m x 3.48 m)
Material Supports Slats4" x 1/8" Galvanized Steel
Maximum Supported Material Load400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements3-Phase, 380-480 VAC ±10%, 50-60 Hz
Noise LevelBelow 80 dBA at one meter for submerged cutting
Speed350 in/min (8,890 mm/min)
Linear Positional Accuracy*±0.001" (±0.025 mm)
Repeatability*±0.001" (±0.025 mm)
Ballbar Circularity*±0.005" (±0.127 mm)

* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C) .

PUMP INFO

Maximized uptime with 1,000 hours between maintenance cycles
Increased production by delivering 30% more cutting power
Variable Frequency Drive reduces startup power consumption and maximizes operating flexibility

Learn more about OMAX pumps

 EnduroMAX 100 HPEnduroMAX 50 HPEnduroMAX 30 HPDynaMAX 575P
Motor Power100 HP (75 kW)50 HP (37kW)30 HP (22 kW)75 HP (56 kW)
MAX Jet Power85 HP (63 kW)42.5 HP (31.5 kW)25.5 HP (18.7 kW)51.6 HP (37.9 kW)
Output Pressure60,000 psi60,000 psi60,000 psi60,000 psi
Orifice & Flow Rate **0.022" / 2.25 gpm
(0.56 mm / 8.52 lpm)
0.016" / 1.20 gpm
(0.41 mm / 4.54 lpm)
0.012" / 0.67 gpm
(0.30 mm / 2.54 lpm)
0.017" / 1.5 gpm
(0.43 mm / 5.68 lpm)
Footprint LxWxH44" x 62" x 44"
(1,118 mm x 1,575 mm x 1,118 mm)
66" x 36" x 38.5"
(1,676mm x 914mm x 978mm)
66" x 36" x 38.5"
(1,676mm x 914mm x 978mm)
40" x 79" x 59"
(1016 mm x 1996 mm x 1509 mm)

Want to know more about the OMAX 120X Precision Jetmachining Center? Contact Sales