OptiMAX 60X Abrasive Waterjet

OptiMAX 60X OptiMAX 60X

OptiMAX 60X
PRECISION JETMACHINING CENTER

The OMAX OptiMAX 60X is the culmination of three decades of engineering expertise and experience, resulting in the world’s most advanced waterjet.

  • Cutting envelope of 10' x 5’ 2” (3.04 m x 1.57 m)
  • ±0.001" (±0.025 mm) linear position accuracy

Waterjet system includes pump and software.
Contact OMAX about optional accessories for your OptiMAX

Expand all

  • Backed by our exclusive IntelliMAX Premium Software
  • Exclusive IntelliTRAX abrasive jet linear drive system provides 350 in/min (8.9 m/min) traverse with real-time closed-loop positioning feedback
  • 12-inch (305 mm) programmable Z axis travel with lowest ceiling height requirement design in the industry.
  • Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA

  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
  • Does not create heat-affected zones or mechanical stresses
  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • No tool changes & minimal fixturing dramatically reduce setup

DIMENSIONS & SPECS

Footprint (with pump & controller)22' 8" x 11' 11" (6.91 m x 3.63 m)
Height (with Scissor plumbing)9' 9" (2.97 m)
Operating Weight36,118 lb (16,383 kg)
Weight (tank empty)8,500 lb (3,855 kg)
X-Y Cutting Travel*10' x 5' 2" (3.04 m x 1.57 m)
Z-Axis Travel (with Motorized Z Axis)*12" (304 mm)
Table Size12' 6" x 6' 2" (3.81 m x 1.88 m)
Material Supports Slats4" x 1/8" Galvanized Steel
Maximum Supported Material Load400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements3-Phase, 380-480 VAC ±10%, 50-60 Hz
Noise LevelBelow 80 dBA at one meter for submerged cutting
Speed350 in/min (8.89 m/min)
Linear Positional Accuracy*±0.001" (±0.025 mm)
Repeatability*±0.001" (±0.025 mm)
Ballbar Circularity*±0.003" (±0.076 mm)

* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).

PUMP INFO

Maximized uptime with 1,000 hours between maintenance cycles
Increased production by delivering 30% more cutting power
Variable Frequency Drive reduces startup power consumption and maximizes operating flexibility

Learn more about OMAX pumps

  EnduroMAX 50 HP EnduroMAX 40 HP EnduroMAX 30 HP
Motor Power 50 HP (37kW) 40 HP (30kW) 30 HP (22 kW)
MAX Jet Power 42.5 HP (31.5 kW) 34.0 HP (34 kW) 25.5 HP (18.7 kW)
Output Pressure 60,000 psi 60,000 psi 60,000 psi
Orifice & Flow Rate 0.016" / 1.20gpm
(0.41 mm / 4.54 lpm)
0.014" / 0.92gpm
(0.36 mm / 3.48 lpm)
0.012" / 0.67 gpm
(0.30 mm / 2.54 lpm)
Footprint LxWxH 66" x 36" x 38.5"
(1,676mm x 914mm x 978mm)
66" x 36" x 38.5"
(1,676mm x 914mm x 978mm)
66" x 36" x 38.5"
(1,676mm x 914mm x 978mm

Want to know more about the OptiMAX 60X Precision Jetmachining Center? Contact Sales