MAXIEM 2080

JetMachining Center »

All products meet rigorous international standards and requirements. Learn more »

The next generation MAXIEM 2080 JetMachining Center sets a new standard for large format abrasive waterjet machining. Faster, smoother, and more precise, the MAXIEM 2080 is ideal for a full scale modern machining needs. The exclusive advanced Intelli-TRAX digital linear encoder provides one-micron resolution instant feedback to the motor control system so the machine knows precisely where the cutting head is at all times. The mobile control station with widescreen display provides flexibility in controller positioning. Optional accessories such as the A-Jet for 5-axis cutting and taper compensation and Collision Sensing Terrain Follower for accurate machining of warped materials expand your JetMachining capabilities and dramatically improve production.

Technical Specs
Benefits & Features
Resources

Units:

US
Metric

MAXIEM 2080 Front View

10’ 4” Height 3,150 mm Height

31’ 3” Length 9,525 mm Length
MAXIEM 2080 Side View

10’ 4” Height 3,150 mm Height

12’ 2” Width 3,708 mm Width

Machine Dimensions

Footprint * – (L x W)	31’ 3” x 12’ 2”	9,525 mm x 3,708 mm
Height **	10’ 4”	3,150 mm
Weight (tank empty)	8,700 lb	3,946 kg

Work Envelope

X-Y Cutting Envelope ***	27’ 2” x 6’ 7”	8,280 mm x 2,007 mm
Z-Axis Travel ***	12”	305 mm
Table Size – (L x W)	27’ 10” x 7’ 0”	8,484 mm x 2,134 mm

Standard Model Specifications

Speed	500 in/min	12,700 mm/min
Linear Positional Accuracy	±0.0030"	±0.0762 mm
Repeatability	±0.0010"	±0.0254 mm
Ballbar Circularity	±0.0050"	±0.1270 mm

* Footprint does not include controller or pump.

** With standard scissor plumbing.

*** Additional accessories may reduce travel.

Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry
Backed by our exclusive Intelli-MAX Software with real world cutting data
Small, efficient footprint for minimal floor space utilization
The mobile control station allows operators direct and efficient access to the cutting process with storage for all of the tools and spares
Powerful all-in-one controller computer with large 23" screen
Drive system sealed against water, dirt, and grit
No tool changes & minimal fixturing dramatically reduce setup
Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
Does not create heat-affected zones or mechanical stresses
Leaves behind a satin-smooth edge, reducing secondary operations
No noxious gases, liquid or oils used in, or caused by, the machining process
Environmentally "green" system with quiet and clean operation with low electrical consumption
Shipped as a completely pre-assembled and factory-tested system
Designed and manufactured at the OMAX factory in Kent, Washington, USA
Standard patent-pending Intelli-TRAX traction drive inside the X-Y Axis beams fully enclosed inside coated steel covers
Standard Intelli-VISOR SE System Monitoring offers predictive maintenance and system monitoring to minimize unexpected downtime
Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability
Optional Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
Optional Bulk Abrasive Delivery System transports garnet from the assembly's large hopper into the Zero Downtime Hopper located on the Z-Axis
Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal
Optional Intelli-CAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
Highly efficient, industry-proven direct drive pumps available up to 40 hp with operating efficiencies up to 85%
Uses substantially less cooling water than inefficient hydraulic intensifier pumps
Lowest electrical consumption compared to other pump technology

Documents

MAXIEM 2080 Specsheet (.pdf)

Software Overview (.pdf)

Videos

What Owners Say

The waterjet's cold cutting process is cleaner; we don't have to worry about modifying the chemistry of our specimens or introducing heat.

Brandon McVaugh of Laboratory Testing Inc.
We can cut parts right to size with our OMAX machines. The machines' Tilt-A-Jet accessory, precision table motion and easy-to-use controls are what make that possible.

Jack of Jack's Machine Co.
OMAX solved the 'concept to finished part' problem. What used to take weeks now takes only hours...

Peter of Asterisk Inc
With reverse engineering, we've essentially been able to take blueprints, sketches, and mylars, scan them and input them into the OMAX software. We're able to trace over the original blueprint and use the scaling features to cut a prototype.

Scott of Waterjet West
The waterjet gives our employees the opportunity to learn new skills and, because we can set it up for automated cutting to run unattended, it frees up our employees to focus on other mission essential tasks.

Brandon McVaugh of Laboratory Testing Inc.
Instead of three to four hours to take a specimen to rough finish with a saw, we can accomplish the same process in 45 minutes on the MAXIEM.

Brandon McVaugh of Laboratory Testing Inc.
I advertise having the Tilt-A-Jet for cutting tight tolerance; however, when quoting a specific project I can use it as my secret weapon to meet my customer's accuracy guidelines. This allows me to produce taper free parts.

Ed Wenz of MarZee Waterjet Services
The OMAX machine made it possible for us to survive during this very difficult economic period.

Torres of Amaida Machine Shop, LLC
The motion control that OMAX has is superior to other machines that are out there. The things my customers comment on the most is the quietness of the machine and its accuracy and repeatability.

Ted of Hydrocut Waterjet
We realized how much money we saved if we kept most of our cutting work in-house instead of outsourcing.

Mr. Makis of Custom Precision Technologies
We were losing too much time with secondary operations. In looking for a solution we had to carefully consider our equipment choices to avoid processing that might create heat-affected zones in the specimen or change its properties. The MAXIEM 1515 was modestly priced but provided a lot of capability

Brandon McVaugh of Laboratory Testing Inc.
The dining table was a very exciting project which could not have been done without the OMAX.

Peter of Carapace Armor Technology
We came to the realization that waterjet was a critical tool for efficient prototyping for several reasons. It's faster, easier to set up and operate and handles more materials than traditional machine tools.

Dr. Coope of British Columbia Cancer Agency’s Genome Science Centre
Waterjet cutting technology has greatly increased our manufacturing capacity and given us the ability to cut virtually any metal, glass, plastic and composites. Anyone considering new equipment for cutting in manufacturing should explore waterjet.

Tom Bezaire of CenterLine (Windsor) Ltd.
We like having a waterjet as opposed to plasma or laser because it's more diverse.

Tim Trotter, President of Troco Custom Fabricators
It also gives us an advantage from a throughput perspective because we're able to provide near-net-shape specimens to other departments for the next steps in that material's certification procedure.

Brandon McVaugh of Laboratory Testing Inc.
In the morning, we can go through and cut an entire product out and have a prototype put together because we can do everything in-house and have the accuracy of the waterjet.

Joel of Jacyl Technology
Because of the OMAX waterjet machine and the ease-of-use with the software, it allows us to nest parts in materials and get more pieces per sheet.

Shane of TruPart Manufacturing Inc.

View All Articles

MAXIEM Expands Product Line for Large-Scale Production

KENT, Wash. – OMAX Corporation continues to set new standards in abrasive waterjet cutting technology with the expansion of its line of MAXIEM JetMachining® Centers. The company introduced three larger sizes of its next generation MAXIEM to meet the needs of shops, OEMs, metal service centers, and fabricators for large-scale production.

The first five models in the next...Read More »

Additional Accessories

View All Accessories

Contact your sales representative for more information.

MAXIEM 2080 Front View

MAXIEM 2080 Side View