GlobalMAX
1508
JETMACHINING CENTER
The GlobalMAX 1508 is a compact, value-focused yet powerful abrasive waterjet.
- Cutting envelope of 2' 7' x 5' 0" (0.78 m x 1.52 m)
- ±0.003" (±0.076 mm) linear position accuracy
Expand all
- IntelliMAX Global software uses our 4th generation cutting model to deliver the fast and efficient cutting
- Innovative Omega Drive System provides smoother transition from rotary motion to linear motion compared to traditional rack and pinion drive systems
- Omega Drive tooth engagement minimizes backlash and improves reliability
- Designed and manufactured at the OMAX factory in Kent, Washington, USA
- Does not create heat-affected zones or mechanical stresses
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
- No tool changes & minimal fixturing dramatically reduce setup
DIMENSIONS & SPECS
| Footprint (with pump) | 5'3" x 11' 8" (1.60 m x 3.54 m) |
|---|---|
| Height (with whip plumbing) | 7'2" (2.18 m) |
| Operating Weight (with water in tank) | 5400 lb (2449 kg) |
| Weight (tank empty) | 3280 lb (1488 kg) |
| X-Y Cutting Travel | 2'7" x 5' (0.78 m x 1.52 m) |
| Z-Axis Travel | 5" (127 mm) |
| Table Size | 2' 10" x 5' 5" (0.86 m x 1.64 m) |
| Maximum Supported Material Load | 100 lbs/sq ft (488 kg/sq meter) |
|---|---|
| Electrical Requirements | Varies depending on configuration. (See pump specs.) |
| Noise Level | Below 80 dBA at one meter for submerged cutting |
| Speed | 500 in/min (12.7 m/min) |
| Linear Positional Accuracy* | ±0.003" (±0.076 mm) |
| Repeatability* | ±0.001" (±0.025 mm) |
| Ballbar Circularity* | ±0.007" (±0.178 mm) |
* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).
PUMP INFO
Direct Drive technology proven in thousands of installations worldwide
Efficient GlobalMAX pumps convert over 85% electrical power to pure cutting power
| GlobalMAX 30 HP | GlobalMAX 20 HP | GlobalMAX 10 HP | |
|---|---|---|---|
| Motor Power | 30 HP (22 kW) | 20 HP (15 kW) | 10 HP (7.5 kW) |
| MAX Jet Power | 25.5 HP (19 kW) | 17 HP (12.5 kW) | 7 HP (5.2 kW) |
| Output Pressure | 45,000 psi | 45,000 psi | 30,000 psi |
| Orifice & Flow Rate ** | 0.015" / 0.96 gpm (0.33 mm / 3.63 lpm) |
0.012" / 0.62 gpm (0.30 mm / 2.35 lpm) |
0.011" / 0.40 gpm (0.28 mm / 1.51 lpm) |
| Footprint LxWxH | 52.5" x 31" x 42" (1,334 mm x 787 mm x 1067 mm) |
52.5" x 31" x 42" (1,334 mm x 787 mm x 1067 mm) |
