Tag: Nesting

Adding Abrasive Waterjet Increases CNC Milling Profitability

How Adding Abrasive Waterjet Increases CNC Milling Profitability

An ever growing number of fabricators and machine shops are gaining a competitive advantage by incorporating abrasive waterjets to their machining mix. What used to be known in the 80s as a rather obscure, albeit fascinating, cutting method has gone mainstream. In fact, abrasive waterjet machining is one of the fastest...

5 Ways To Increase Productivity With Your Waterjet

Cut out net blanks on the waterjet before doing final machining on a CNC mill. You can save a lot of machining time by first cutting parts to their rough shape with the waterjet, then doing final machining on a CNC mill. Not only will the actual cutting time be shorter, but you’ll also save time in machine setup and material handling. Setting up a job on a CNC mill can be a complex,...

Autonesting Saves Time

CAD/CAM software

Machine company makes waves with Jetcam driving waterjet cutter

Wagner Machine Co. of Champaign, IL, wanted its Omax 2652 waterjet cutter to autonest to save time that was spent manually creating part nests in CAD and exporting them.

Wagner provides precision CNC machine services spanning a wide variety of cutting technologies. The company purchased an Omax...

Machining Composites With Abrasive Waterjet

Cutting composite material is a perfect application for abrasive waterjets. A precision waterjet with a taper compensating head will machine 1/4" thick carbon fiber as fast as 180 inches/minute at 60,000 psi with taper of less than 0.001" per side. And 13/16" thick G10 can be machined as fast as 40 inches/minute at 60,000 psi with the same precision.

While speed and...

Custom Cut Machine Inc.

Custom Cut Machine Inc, based in British Columbia, Canada, replaced their Flow CNC waterjet driven by the vendors own CAM software in June 2007 with an OMAX 80160. They had been considering a CAM system upgrade since 2005, as although the previous software worked fairly well there was room for improvement with nesting efficiency and ease of use.

Lyle Paulson, President said; “I...

Wagner Machine Co

Wagner Machine Co, based in Champaign, Illinois provides precision CNC machine shop services spanning a wide variety of cutting technologies. They purchased an OMAX 2652 Waterjet cutter in 2003, which has a maximum cutting table of 26” x 52”. The supplied CAM software was capable of nesting simple components manually, but did not have the ability to rotate components or...

OMAX and JETCAM Nesting

OMAX Corporation, based in Kent, Washington manufactures high end waterjet machines under both OMAX® has created a change in the way they work; “It’s and MaxiemTM brands. Many of the machines’ components are manufactured using waterjet technology, and while the company’s own CAM software provided a workable solution OMAX were looking for ways to reduce programming...

What can we help you with?