Waterjet Cutting Rubber
Water-only waterjet nozzles cut rubber faster and cleaner, though some very hard rubbers may require abrasive. Water-only cutting wastes little material, is quieter and increases the nozzle life. Water-only cutting also proceeds very quickly at speeds of 100 inches per minute or faster.
Signs cut from 3M Rubber/Adhesive (courtesy Swarco Ind., Columbia IN)
Some of the rubber and foam parts shown here are used in the construction of OMAX machines
Rubber puzzle pieces cut with a water-only nozzle in under three minutes
Connect and follow
OMAX on FacebookOMAX on TwitterOMAX on LinkedIn