Connect and follow

In the event that water temperature exceeds 60°F on a seasonal or regular basis, shortened pump seal life can occur.
The Chiller cools water supply for the pump which improves seal life. Depending on the rating of the Chiller and ambient
conditions, the water temperature can be lowered by 20°F to 40° F (11°C to 22°C).

Water from the OMAX system's charge pump is sent through the Chiller and returns to the pump. A portion of the water
is recirculated to the waterjet's internal charge tank to minimize usage.

Standard Features

• 12,000 BTU/hr chillers are available in three phase 460 VAC (4 Amp)
• 24,000 BTU/hr chillers are available in three phase 460 VAC (7 Amp)
• 36,000 BTU/hr Chillers are available in 3 phase 230/380/460 VAC (18/9/9 amps)
  
• Designed for 50° to 125° ambient temperature (10° C to 52° C)
• All wet-end components made from non-ferrous material
• All connecting hardware supplied by OMAX
• Digital temperature readout
• Refrigerator type R-22

Benefits

• Control the inlet water temperature entering your pump equipment
• Improve your pump's seal life
• Reduce pump rebuilds and machine downtime

Requirements

• Inlet water fed to the OMAX pump is required to be 60° F (16° C). If inlet water temperature is above 60° F, a Chiller will cool the water for the pump.

Footprints

• 12,000 BTU/hr: 25.5" long x 42" wide x 47" (648 mm x 1,067 mm x 1,194 mm) high footprint; weight 325 lbs (147 kg)
• 24,000 BTU/hr: 25.5" long x 42" wide x 47" (648 mm x 1,067 mm x 1,194 mm) high footprint; weight 350 lbs (159 kg)
• 36,000 BTU/hr: 50" long x 28" wide x 43" (1,270 mm x 711 mm x 1,092 mm) high footprint; weight 800 lbs (363 kg)
  
  

Electrical Requirements

• 12,000 BTU/hr: 3 phase 460V (4 amps)
• 24,000 BTU/hr: 3 phase 460V (7 amps)
• 36,000 BTU/hr: 3 phase 230/380/460 VAC (18/9/9 amps)