(600 lb & 2,000 lb options)
The Bulk Abrasive Delivery System is manufactured to the standards of ASME code or CE marking status. The tank can be pressurized to 125 psi (0.86 MPa) and can be located up to 20 feet away from your OMAX JetMachining Center. The system uses compressed air to automatically transport garnet from the Bulk Abrasive hopper to the 25 lb hopper located on the OMAX machine.
The stationary 2,000 lb Bulk Abrasive Delivery System, and the mobile 600 lb System
The bulk abrasive feed system is used in conjunction with, but does not replace, the existing small-sized hopper near the nozzle. This lets you refill the large hopper without having to stop the OMAX, while the machine uses the smaller hopper. It also gives you half an hour visual warning when it has run out of abrasive, so you know to fill it before it runs out of abrasive completely.
Large capacity abrasive delivery system offers the following features:
- Heavy-duty
- Automatically feeds the 25 lb garnet hopper located on the OMAX machine
- Can be located 20 feet (6 m)from the machine
System Specifications
| Delivery System | 600 lb System | 2000 lb System |
| Height | 54" (1,372 mm) | 82" (2,083 mm) |
| Footprint | 37" x 37" (940 mm x 940 mm) | 38" x 38" (965 mm x 965 mm) |
| Min. supply pressure | 90 psi (0.62 MPa) | 90 psi (0.62 MPa) |
Connect and follow
OMAX on FacebookOMAX on TwitterOMAX on LinkedIn