{title}





“The waterjet’s ability to cut any material - such as titanium, ceramic, and plastic - gives us the flexibility to tap into other markets,” Bentz said. FusionTECH Model 80160
OMAX Model 5555
{content}

Overview

The Model 5555 JetMachining Center cuts complex flat parts out of most materials including metal, plastic, glass, ceramic and composites directly from a CAD drawing or .DXF file. JetMachining is ideal for short-run part production, just-in-time manufacturing, tooling and prototype part development. No tool changes or complex fixturing reduces setup times by at least 50%.

Features / Benefits

Standard Features

  • Patented "Compute First-Move Later" motion control system including CAD/CAM software with online help.
  • X-Y table with motorized Z-Axis.
  • Pre-loaded linear bearings and precision ball screws.
  • Complete component protection against water, dirt, and grit.
  • Rapid water level control for submerged cutting.
  • Durable abrasive feed system with precision OMAX MAXJET® 5 Nozzle Assembly.
  • Ultra-high pressure direct drive pump.
  • Hard plumbing.
  • Vibration-free motion through use of patented shear damper.

Abrasivejet Benefits

  • Machines a wide range of materials and thicknesses.
  • Does not create heat affected zones or mechanical stresses.
  • Rapid setup, no tool changes are required.
  • Minimal fixturing required.
  • Leaves behind a satin smooth edge, reducing secondary operations.
  • No noxious gases, liquids, or oils are used in (or caused by) the machining process.
  • Completes most work below 80 dBA for submerged cutting.

Specifications

Machine Dimensions

Footprint 131" x 95" (3327 mm x 2413 mm)
Weight 6291 lb (2854 kg)
Height 118" (2998 mm)
Operating Weight 13,000 lb (5897 kg) (with water in tank)

Work Envelope

X-Y Travel 55" x 55" (1397 mm x 1397 mm)
Table Size 80" x 65" (2032 mm x 1650 mm)
Material Supported Slats 4" x 1/8" Galvanized Steel
Maximum Supported
Material Load 250lbs/sq.ft. (1,200 kg/sq. meter)
(Optional accessories may reduce travel. Contact OMAX for information.)

Computer Control System

Hardware Personal computer
Control Software Integrated CAD/CAM system directly uses .DXF files

Drive Description

Closed loop, digital drives
Brushless servo motors
Pre-loaded ball screws, recirculating balls
Linear bearings with hardened, precision ground ways
Cantilever Y-Axis on bridge X-Axis

Accuracy of Motion at 70° F

Ball Bar Circularity (Over 12")
At Max. Traverse Velocity ±0.003" (±0.08 mm)
Repeatability ±0.002" (±0.051 mm)
Squareness 0.002" per ft (0.17 mm/m)
Straightness 0.003" per ft (0.25 mm/m)
Backlash 0.0007" max. (0.018 mm)

Speed

180 inches per minute standard (4572 mm/min)

Electrical Requirements

440-500 VAC, 60 Hz/3-Phase
208-230 VAC, 60 Hz/3-Phase (step-up transformer available as an option)
International CE: 220-240 VAC, 50 Hz/Single-Phase
(Note: Contact OMAX for detailed utility requirements. Pumps are built to meet UL and CE specifications.)

Pump Options

30 horsepower optional; 50,000 psi
40 horsepower optional; 55,000 psi

Noise Level

Below 80 dBA for submerged cutting

Note: Specifications subject to change without notice.

Materials Cut

Materials Cut

Each OMAX JetMachining Center is designed to easily cut an array of materials and thicknesses, from stone, metal, plastic and glass, to rubber, ceramics and composites. Currently, the most profitable precision applications involve metals such as aluminum, tool steel, stainless steel, mild steel and titanium, all materials commonly used in many engineering applications. With the ability to quickly and accurately machine nearly any two-dimensional shape imaginable in thickness up to 1" (2.5cm) or less than 1" (25 mm), OMAX is a versatile addition to any machine shop.

To learn more about OMAX machining capabilities for different materials click on any icon below:

Financing

OMAX® Corporation and your OMAX distributor work with virtually all national lenders, each of whom consider the OMAX JetMachining® Center an excellent in fact "preferred" -- collateral.  That preferential treatment means we can tailor financing to your particular requirements.  Some of our program features include:

  • Ease of Approval (many to most approvals on a one page credit application for an existing business)
  • Delayed Payments
  • Low Down Payments
  • "Start-Up" Financing
  • Financing Options for Upgrades to Your OMAX JetMachining Center (because every OMAX Center upgradeable for new options, since the first OMAX Center)
  • Most importantly extended terms leases to 84 months, often with no prepayment penalties*


If you need particular lease features JUST ASK. At OMAX, we often work with our "lender network" to create a customized lease structure for you.

* subject to a minimum twelve payments having been received.

Technical Partners

OMAX is an RCR Racing and Hendrick Motorsports Technical Partner

Address: 21409 72nd Ave South, Kent, WA 98032 Telephone: 1-800-838-0343 or 253-872-2300 Fax: 253-872-6190 Email: OMAX@OMAX.COM Privacy Policy

See us at IMTS 2010