Materials Cut
› Materials Home
› Aluminum
› Ceramics
› Composites
› Copper
› Exotic Alloys
› Glass
› Hardened Tool Steel
› Rubber
› Stainless Steel
› Steel
› Stone
› Titanium
› Wood
OMAX software with Intelli-MAX™ technologies.
Material: Stainless Steel (304)
Time to make this part: 8.614 min
Rubber can be cut with a water-only nozzle for faster and cleaner cutting, though some very hard rubbers may require abrasive. Water-only cutting wastes little material, is quieter and increases the nozzle life. Water-only cutting also proceeds very quickly at speeds of 100 inches per minute or faster.
Signs cut from 3M Rubber/Adhesive (courtesy Swarco Ind., Columbia IN)
Some of the rubber and foam parts shown here are used in the construction of OMAX machines
Rubber puzzle pieces cut with a water-only nozzle in under three minutes
Address: 21409 72nd Ave South, Kent, WA 98032 | Telephone: 1-800-838-0343 or 253-872-2300
Fax: 253-872-6190 | Email: OMAX@OMAX.COM | Privacy Policy