OMAX JetMachining Centers
› Machines Overview
› NEW! Fabricator
› Model 2626
› Model 2626|xp
› Model 2652
› Model 55100
› Model 80160
Downloads:
Fabricator spec sheet (PDF)
2626 spec sheet (PDF)
2626|xp spec sheet (PDF)
Catcher Tank Cooler spec sheet (PDF)
P-3055V pump spec sheet (PDF)
2652 spec sheet (PDF)
55100 spec sheet (PDF)
80160 spec sheet (PDF)
An example of two aluminum parts done in 1⁄2" (1.3 cm) thick aluminum, which took approximately five minutes machining time
Fabricator Product information
Fabricator spec sheet (PDF) [659 Kb]
Specifications*
| Machine Dimensions | Footprint | 243" x 134 " | 6170 mm x 3405 mm | |
| Footprint with optional SRS | 288" x 134 " | 7315 mm x 3405 mm | ||
| Expandable length | 2 m increments | |||
| Weight (tank empty) | 10,000 lb | 4500 kg | ||
| Height | 144" | 3660 mm | ||
| Operating Weight (with water in tank) |
35,000 lb | 15,900 kg | ||
Work Envelope |
Y Travel | 80" | 2032 mm | |
| X Travel | 168" | 4267 mm | ||
| Expandable X Travel | Contact local distributor for details | |||
| Table size | 174" x 89 " | 4419 mm x 2261 mm | ||
| Material Support | 4" x 1/8" Galvanized Steel | |||
| Maximum Supported Materials Load | 250 lbs/sq. ft. | 1,200 kg/m | ||
| Computer Control System | Hardware | Personal computer | ||
| Control software | Integrated CAD/CAM system directly uses .DXF files | |||
| Drive Description | Closed loop, digital drives | |||
| Brushless servo motors | ||||
| Pre-loaded ballscrews with recirculating ball bearings and hardened precision ground ways in Y-Axis | ||||
| Traction drive with linear encoder in X-Axis | ||||
| Bridge style Y-Axis plus optional second cutting head with adjustable Y-spacing | ||||
| Full Y-Axis travel for single-head operation | ||||
| Motor controlled precision Z-Axis operation | ||||
| Accuracy of Motion at 70 degrees F | Ball Bar Circularity (Over 12") | |||
| At Cutting Speed | ±0.005" | ±0.13 mm | ||
| Repeatability | ±0.005" | ±0.13 mm | ||
| Speed | 180 inches per minute standard (speed can be increased if desired) |
|||
| Electrical Requirements | 3 phase, 380-480 VAC, ±10%, 50-60 Hz | |||
| (Contact OMAX for detailed utility requirements. Pumps are built to meet UL and CE specifications.) | ||||
| Pump Options | 30 horsepower, 50,000 psi | |||
| 40 horsepower, 55,000 psi | ||||
| Noise Level | Below 80 dBA for submerged cutting | |||
* Specifications subject to change without notice
Standard Features
- X-Y table with Motorized Z-axis
- Rapid water level control for submerged cutting
- Single MAXJET® 5 Nozzle including all necessary high-pressure plumbing.
- OMAX Patented motion control system incorporating Windows® XP software.
- 600 lb. abrasive hopper
- Black anodized aluminum covers for X-axis components.
- Ultra-high pressure direct drive pump
- Table cutting length expandable by two meter increments.
- Precision Optical Locator
- Second MAXJET® 5 Nozzle Assembly with Motorized Z-Axis, and all necessary hardplumbing.
- OMAX Solids Removal System (SRS)
- Tilt-A-Jet® for taper-free parts
- Water-only MAXJET 5 Nozzle for cutting soft materials
- MAXJET 5 MiniJet Nozzle Assembly
- Waterjet Brick
- Weir Tank
- Z-Axis Drill
- Manual Tilt Z
- Terrain Follower
- Tall slats for elevated bed
- Two meter extensions
Address: 21409 72nd Ave South, Kent, WA 98032 | Telephone: 1-800-838-0343 or 253-872-2300
Fax: 253-872-6190 | Email: OMAX@OMAX.COM | Privacy Policy