OMAX JetMachining Centers
› Machines Overview

› NEW! Fabricator

› Model 2626

› Model 2626|xp

› Model 2652

› Model 55100

› Model 80160

Downloads:

Fabricator spec sheet (PDF)

2626 spec sheet (PDF)

2626|xp spec sheet (PDF)

Catcher Tank Cooler spec sheet (PDF)

P-3055V pump spec sheet (PDF)

2652 spec sheet (PDF)

55100 spec sheet (PDF)

80160 spec sheet (PDF)




An example of two aluminum parts done in 1⁄2" (1.3 cm) thick aluminum, which took approximately five minutes machining time
80160 Product information

80160 spec sheet (PDF) [860 Kb]





Specifications*

Machine Dimensions Footprint 243" x 134" 6.2 m x 3.4 m
288” x 134” 7.3 m x 3.4 m
Weight (tank empty) 10,000 lbs 4550 kg
Height 144" 3.7 m
Operating Weight (with water in tank) 35,000 lbs 15,900 kg
Work Envelope/
Cutting Table 		X Axis Travel** 168" 4.26 m
Y Axis Travel** 80" 2.03 m
X Axis Table Size 174" 4.42 m
Y Axis Table Size 89 " 2.31 m
Material Support Slats 4" x 1/8" Galvanized Steel 10 cm x 0.3 cm
Maximum Supported Material Load 250 lbs/sq. ft. 1,200 kg/m 2
Computer Control System Hardware

Personal Computer

Controller System Control Software

Integrated CAD/CAM system directly uses .DXF files

Drive Description Closed loop, digital drives
Brushless servo motors
Pre-loaded ball screws, recirculating ball bearings and hardened precision ground ways
Bridge style Y-Axis
Optional: two cutting heads with adjustable Y-spacing
Single cutting head
Full Y-Axis travel for single-head operation
Motor controlled precision Z-axis
Accuracy of Motion Ball Bar Circularity (Over 12") At Max Traverse Velocity ±0.003" ±0.08 mm
Repeatability ±0.002" ±0.051 mm
Squareness 0.002" per ft 0.17 mm/m
Straightness 0.003" per ft 0.25 mm/m
Backlash 0.0007" max. 0.018 mm
(Specifications per National Machine Tool Builders Association standard)
Speed 180 inches per minute standard (5.1 m/min)
(speed can be increased if desired)
Electrical Requirements 3 Phase, 380-480 VAC ±10%, 50-60 Hz
(Note: Contact OMAX for detailed utility requirements. Pumps are built to meet UL and CE specifications.
Pump Options 30 horsepower, 50,000 psi 22 kW, 345,000 kPa
40 horsepower, 55,000 psi 30 kW, 379,200 kPa
Noise Level Below 80 dBA for submerged cutting

* Specifications subject to change without notice
** Optional accessories may reduce travel.

Standard Features Optional Accessories
 

Address: 21409 72nd Ave South, Kent, WA 98032 | Telephone: 1-800-838-0343 or 253-872-2300
Fax: 253-872-6190 | Email: OMAX@OMAX.COM | Privacy Policy