OMAX JetMachining Centers
› Machines Overview
› NEW! Fabricator
› Model 2626
› Model 2626|xp
› Model 2652
› Model 55100
› Model 80160
Downloads:
Fabricator spec sheet (PDF)
2626 spec sheet (PDF)
2626|xp spec sheet (PDF)
Catcher Tank Cooler spec sheet (PDF)
P-3055V pump spec sheet (PDF)
2652 spec sheet (PDF)
55100 spec sheet (PDF)
80160 spec sheet (PDF)
An example of two aluminum parts done in 1⁄2" (1.3 cm) thick aluminum, which took approximately five minutes machining time
2626 Product Information
Smaller Work Envelope: Compact size, precision machining of smaller parts.
2626 spec sheet (PDF) [499 Kb]
2626 Specifications*
| Machine Dimensions | Footprint | 72" x 116 " | (1.8 m x 2.9 m) | |
| Weight (tank empty) | 3000 lb | (1364 kg) | ||
| Height | 92" | (2.3 m) | ||
| Operating Weight (with water in tank) | 6517 lb | (2962 kg) | ||
| Work Envelope | X-Y Travel** | 29" x 26" | (737 mm x 660 mm) | |
| Table size | 46" x 31" | (1.0 m x 0.8 m) | ||
| Computer Control System | Hardware | Personal computer | ||
| Controller System | Control software | Integrated CAD/CAM system directly uses DXF files | ||
| Drive Description | Closed loop, digital drives | |||
| Brushless servo motors | ||||
| Pre-loaded ball screws, recirculating balls | ||||
| Linear bearings with hardened, precision ground ways | ||||
| Cantilever Y-Axis on bridge X-Axis | ||||
| Accuracy of Motion at 70 degrees F | Ball Bar Circularity (Over 12") | ±0.003" | (±0.08 mm) | |
| Repeatability | ±0.0013" | (±0.033 mm) | ||
| Squareness | 0.0013" per ft | (0.11 mm/m) | ||
| Straightness | 0.0017" per ft | (0.14 mm/m) | ||
| Backlash | 0.0007" max. | (0.018 mm) | ||
| (Specifications per National Machine Tool Builders Association standard) | ||||
| Speed | 200 inches per minute standard
(5080 mm/min) (speed can be increased if desired) |
|||
| Power Required | 3 Phase, 380-480 VAC±10%, 50-60 Hz |
|||
| Pump Options | 30 horsepower, 50,000 psi | 22 kW, 345,000 kPa | ||
| 40 horsepower, 55,000 psi | 30 kW, 379,200 kPa | |||
| Noise Level | Below 80 dBA for submerged cutting | |||
* Specifications subject to change without notice.
** Optional accessories may reduce travel.
Optional Accessories
Address: 21409 72nd Ave South, Kent, WA 98032 | Telephone: 1-800-838-0343 or 253-872-2300
Fax: 253-872-6190 | Email: OMAX@OMAX.COM | Privacy Policy