A part made from 3" (7.6mm) aluminum. OMAX Software lets you get sharp corners without washout

OMAX® Solids Removal System (SRS)


SRS spec sheet (PDF) [8.2008]




OMAX Solids Removal System

Solids Removal System for Models 2626, 2626|xp, 2652, 5555, 55100, 60120, 80160, and the 80X removes waste garnet from the catcher tank and deposits it into a dump hopper. Water from the hopper flows back to the tank without the use of a pump (gravity return).

Standard Features



The Solids Removal System comes complete with:
  • 3/4 yard (0.7 m) hopper includes liner for ease of dumping waste garnet from hopper
  • System drive, 1/2 hp (0.4 kW) motor
  • Stainless steel construction on external portion of suction line
  • Suction line flushing feature
  • UL compliance
  • GFCI protection in control box

Benefits

  • Garnet removal rate as high as 5.6 lbs/min (2.5 kg/min)
  • Easier clean-up eliminates the need to shut down the system to clean the waste garnet from the tank
  • Minimal floor space utilization, 21 sq. ft. (2.0 m2)
  • Steel shield protects suction line from being damaged during part cutting
  • Suction line power unit can be removed if material needs to be loaded from the side of tank
  • Lower cost than having the catcher tank cleaned out with a pump truck

Electrical requirement: 110/220 VAC Single Phase 20A


OMAX SRS Shown on Model 55100




Top View of Completed Assembly

Address: 21409 72nd Ave South, Kent, WA 98032 | Telephone: 1-800-838-0343 or 253-872-2300
Fax: 253-872-6190 | Email: OMAX@OMAX.COM | Privacy Policy